en
conf t

line con 0
 exec-timeout 0 0
 logging synchronous

enable secret lmi

hostname bbr2

ip host p5r1 192.168.5.17 192.168.5.33 192.168.5.49 10.5.5.5
ip host p5r2 192.168.5.65 192.168.5.18 192.168.5.34
ip host p5r3 192.168.5.66 192.168.5.50
ip host p6r1 192.168.6.17 192.168.6.33 192.168.6.49 10.6.6.6
ip host p6r2 192.168.6.65 192.168.6.18 192.168.6.34
ip host p6r3 192.168.6.66 192.168.6.50
ip host bbr2 10.5.5.100 10.6.6.100 10.7.7.100 10.8.8.100

no ip domain-lookup 

interface loopback 100
ip address 172.16.12.100 255.255.255.0

interface loopback 101
ip address 172.16.13.100 255.255.255.0

interface Serial1/0
 ip address 10.5.5.100 255.255.255.0
 bandwidth 64
 no shutdown

interface Serial1/1
 ip address 10.6.6.100 255.255.255.0
 bandwidth 64
 no shutdown

interface Serial1/2
 ip address 10.7.7.100 255.255.255.0
 bandwidth 64
 no shutdown

interface Serial1/3
 ip address 10.8.8.100 255.255.255.0  
 bandwidth 64
 no shutdown

router eigrp 200
 network 192.168.0.0 
 network 10.0.0.0
 redistribute connected route-map passext

access-list 1 permit 172.16.12.0
access-list 1 permit 172.16.13.0
route-map passext permit 10
match ip address 1                     

line vty 0 4
 login
 password lmi
end
 
copy run start   



!UNDER router eigrp 200   (a way to reach the loopback addresses without setting up a route-map)
!network 172.16.8.0 0.0.7.255