configure qosmode ingress
disable pace
configure dot1q ethertype 8100
# disable jumbo
config qosprofile QP1 minbw 0% maxbw 100% priority Low
config qosprofile QP2 minbw 0% maxbw 100% priority Normal
config qosprofile QP3 minbw 0% maxbw 100% priority Medium
config qosprofile QP4 minbw 0% maxbw 100% priority High
delete protocol ip
delete protocol ipx
delete protocol netbios
delete protocol decnet
delete protocol appletalk
delete protocol ipx_8022
delete protocol ipx_snap
create protocol IP
create protocol ipx
create protocol netbios
create protocol decnet
create protocol appletalk
create protocol ipx_8022
create protocol ipx_snap
configure vlan default delete ports all
create vlan "Default" 
create vlan "lally-dynamic" 
create vlan "lally-admin" 
create vlan "lally-csmachines" 
#
# Config information for VLAN Default.
config vlan "Default" tag 1     # VLAN-ID=0x1  Global Tag 1
config vlan "Default" protocol "ANY"
config vlan "Default" qosprofile "QP1" 
enable bootp vlan "Default"
# No port is associated with VLAN Default.
#
# Config information for VLAN lally-dynamic.
config vlan "lally-dynamic" tag 748     # VLAN-ID=0x2ec  Global Tag 2
config vlan "lally-dynamic" protocol "ANY"
config vlan "lally-dynamic" qosprofile "QP1" 
# No IP address is configured for VLAN lally-dynamic.
configure vlan "lally-dynamic" add port 1 untagged
configure vlan "lally-dynamic" add port 2 untagged
configure vlan "lally-dynamic" add port 3 untagged
configure vlan "lally-dynamic" add port 4 untagged
configure vlan "lally-dynamic" add port 5 untagged
configure vlan "lally-dynamic" add port 6 untagged
configure vlan "lally-dynamic" add port 7 untagged
configure vlan "lally-dynamic" add port 8 untagged
configure vlan "lally-dynamic" add port 9 untagged
configure vlan "lally-dynamic" add port 10 untagged
configure vlan "lally-dynamic" add port 11 untagged
configure vlan "lally-dynamic" add port 12 untagged
configure vlan "lally-dynamic" add port 13 untagged
configure vlan "lally-dynamic" add port 14 untagged
configure vlan "lally-dynamic" add port 15 untagged
configure vlan "lally-dynamic" add port 16 untagged
configure vlan "lally-dynamic" add port 18 untagged
configure vlan "lally-dynamic" add port 19 untagged
configure vlan "lally-dynamic" add port 20 untagged
configure vlan "lally-dynamic" add port 21 untagged
configure vlan "lally-dynamic" add port 22 untagged
configure vlan "lally-dynamic" add port 23 untagged
configure vlan "lally-dynamic" add port 24 untagged
configure vlan "lally-dynamic" add port 25 untagged
configure vlan "lally-dynamic" add port 26 untagged
configure vlan "lally-dynamic" add port 27 untagged
configure vlan "lally-dynamic" add port 28 untagged
configure vlan "lally-dynamic" add port 29 untagged
configure vlan "lally-dynamic" add port 35 untagged
configure vlan "lally-dynamic" add port 36 untagged
configure vlan "lally-dynamic" add port 37 untagged
configure vlan "lally-dynamic" add port 38 untagged
configure vlan "lally-dynamic" add port 39 untagged
configure vlan "lally-dynamic" add port 40 untagged
configure vlan "lally-dynamic" add port 42 untagged
configure vlan "lally-dynamic" add port 43 untagged
configure vlan "lally-dynamic" add port 44 untagged
configure vlan "lally-dynamic" add port 45 untagged
configure vlan "lally-dynamic" add port 46 untagged
configure vlan "lally-dynamic" add port 47 untagged
config vlan "lally-dynamic" add port 48 tagged
config vlan "lally-dynamic" add port 49 tagged
config vlan "lally-dynamic" add port 50 tagged
#
# Config information for VLAN lally-admin.
config vlan "lally-admin" tag 750     # VLAN-ID=0x2ee  Global Tag 3
config vlan "lally-admin" protocol "ANY"
config vlan "lally-admin" qosprofile "QP1" 
config vlan "lally-admin" ipaddress 128.213.50.253 255.255.255.0 
config vlan "lally-admin" add port 49 tagged
config vlan "lally-admin" add port 50 tagged
#
# Config information for VLAN lally-csmachines.
config vlan "lally-csmachines" tag 749     # VLAN-ID=0x2ed  Global Tag 4
config vlan "lally-csmachines" protocol "ANY"
config vlan "lally-csmachines" qosprofile "QP1" 
# No IP address is configured for VLAN lally-csmachines.
config vlan "lally-csmachines" add port 49 tagged
config vlan "lally-csmachines" add port 50 tagged

# Boot information
use image primary
use configuration primary
# syslog configuration
configure log display debug  
disable log display
configure syslog 128.213.3.4 local0 debug  
enable syslog
delete account user
configure account admin encrypted
pa1Xqt$uTpo/aKCukHvgGEXInG7Z.
pa1Xqt$uTpo/aKCukHvgGEXInG7Z.
create account user "user" encrypted "wI1Eqy$iZ27eMQRx.VjLuvMg8lpX."
enable telnet
configure banner


enable web
enable snmp access
enable snmp trap
configure snmp community readwrite "asldkasjkrp8wnxyzpasd723h"
configure snmp community readonly "rp8wnxyzp"
configure snmp sysName "la3sum"
configure snmp sysLocation ""
configure snmp sysContact "labstaff@cs.rpi.edu"
disable rmon
disable idletimeouts
enable clipaging
enable cli-config-logging
configure port 1 display-string "la311-4"
configure port 1 auto on
enable edp port 1
configure port 2 display-string "la311-1"
configure port 2 auto on
enable edp port 2
configure port 3 display-string "la313-3"
configure port 3 auto on
enable edp port 3
configure port 4 display-string "la311-3"
configure port 4 auto on
enable edp port 4
configure port 5 display-string "la301-4"
configure port 5 auto on
enable edp port 5
configure port 6 display-string "303-1"
configure port 6 auto on
enable edp port 6
configure port 7 display-string "304-1"
configure port 7 auto on
enable edp port 7
configure port 8 display-string "la311-2"
configure port 8 auto on
enable edp port 8
configure port 9 display-string "306-1"
configure port 9 auto on
enable edp port 9
configure port 10 display-string "307-1"
configure port 10 auto on
enable edp port 10
configure port 11 display-string "la310-4"
configure port 11 auto on
enable edp port 11
configure port 12 display-string "308-2"
configure port 12 auto on
enable edp port 12
configure port 13 display-string "308-3"
configure port 13 auto on
enable edp port 13
configure port 14 display-string "305-2"
configure port 14 auto on
enable edp port 14
configure port 15 display-string "309-1"
configure port 15 auto on
enable edp port 15
configure port 16 display-string "free"
configure port 16 auto on
enable edp port 16
configure port 17 display-string "NONE"
configure port 17 auto on
enable edp port 17
configure port 18 display-string "312-1"
configure port 18 auto on
enable edp port 18
configure port 19 display-string "313-1"
configure port 19 auto on
enable edp port 19
configure port 20 display-string "314-1"
configure port 20 auto on
enable edp port 20
configure port 21 display-string "315-1"
configure port 21 auto on
enable edp port 21
configure port 22 display-string "316-1"
configure port 22 auto on
enable edp port 22
configure port 23 display-string "317-1"
configure port 23 auto on
enable edp port 23
configure port 24 display-string "318-1"
configure port 24 auto on
enable edp port 24
configure port 25 display-string "la207-b"
configure port 25 auto on
enable edp port 25
configure port 26 display-string " "
configure port 26 auto on
enable edp port 26
configure port 27 display-string "LA310-1"
configure port 27 auto on
enable edp port 27
configure port 28 display-string "la316-2"
configure port 28 auto on
enable edp port 28
configure port 29 display-string "la316-3"
configure port 29 auto on
enable edp port 29
configure port 30 display-string "NONE"
configure port 30 auto on
enable edp port 30
configure port 31 display-string "302-4"
configure port 31 auto on
enable edp port 31
configure port 32 display-string "312-4"
configure port 32 auto on
enable edp port 32
configure port 33 display-string "305-3"
configure port 33 auto on
enable edp port 33
configure port 34 display-string "314-4"
configure port 34 auto on
enable edp port 34
configure port 35 display-string "la208-c"
configure port 35 auto on
enable edp port 35
configure port 36 display-string "la310-2"
configure port 36 auto on
enable edp port 36
configure port 37 display-string "la203-c"
configure port 37 auto on
enable edp port 37
configure port 38 display-string "la310-3"
configure port 38 auto on
enable edp port 38
configure port 39 display-string "la204-a"
configure port 39 auto on
enable edp port 39
configure port 40 display-string "la206-a"
configure port 40 auto on
enable edp port 40
configure port 41 display-string "la209-d"
configure port 41 auto on
enable edp port 41
configure port 42 display-string "la209-c"
configure port 42 auto on
enable edp port 42
configure port 43 display-string "la205-a"
configure port 43 auto on
enable edp port 43
configure port 44 display-string "la207a-a"
configure port 44 auto on
enable edp port 44
configure port 45 display-string "la209b-b"
configure port 45 auto on
enable edp port 45
configure port 46 display-string "la03 gig uplink"
configure port 46 auto on
enable edp port 46
configure port 47 display-string "la209a-c"
configure port 47 auto on
enable edp port 47
configure port 48 display-string "la3smc"
configure port 48 auto on
enable edp port 48
configure port 49 display-string "la0sum"
enable smartredundancy 49
configure port 49 auto off duplex full
enable edp port 49
configure port 50 display-string "la3swg2"
enable smartredundancy 50
configure port 50 auto on
enable edp port 50

# Protocol definitions
configure protocol IP add etype 806 etype 800 
configure protocol ipx add etype 8137 
configure protocol netbios add llc f0f0 
configure protocol decnet add etype 6004 etype 6003 
configure protocol appletalk add snap 80f3 snap 809b 
configure protocol ipx_8022 add llc e0e0 
configure protocol ipx_snap add snap 8137 

# Spanning tree information 
configure s0 add vlan Default
configure s0 add vlan lally-dynamic
configure s0 add vlan lally-admin
configure s0 add vlan lally-csmachines
configure stpd s0 maxage 8
configure stpd s0 forwarddelay 5
enable stpd s0
enable stpd s0 port 1
configure stpd s0 port cost 19 1
enable stpd s0 port 2
configure stpd s0 port cost 100 2
enable stpd s0 port 3
configure stpd s0 port cost 100 3
enable stpd s0 port 4
configure stpd s0 port cost 100 4
enable stpd s0 port 5
configure stpd s0 port cost 19 5
enable stpd s0 port 6
configure stpd s0 port cost 19 6
enable stpd s0 port 7
configure stpd s0 port cost 19 7
enable stpd s0 port 8
configure stpd s0 port cost 100 8
enable stpd s0 port 9
configure stpd s0 port cost 19 9
enable stpd s0 port 10
configure stpd s0 port cost 100 10
enable stpd s0 port 11
configure stpd s0 port cost 100 11
enable stpd s0 port 12
configure stpd s0 port cost 100 12
enable stpd s0 port 13
configure stpd s0 port cost 100 13
enable stpd s0 port 14
configure stpd s0 port cost 100 14
enable stpd s0 port 15
configure stpd s0 port cost 19 15
enable stpd s0 port 16
configure stpd s0 port cost 100 16
enable stpd s0 port 18
configure stpd s0 port cost 100 18
enable stpd s0 port 19
configure stpd s0 port cost 100 19
enable stpd s0 port 20
configure stpd s0 port cost 19 20
enable stpd s0 port 21
configure stpd s0 port cost 19 21
enable stpd s0 port 22
configure stpd s0 port cost 19 22
enable stpd s0 port 23
configure stpd s0 port cost 19 23
enable stpd s0 port 24
configure stpd s0 port cost 19 24
enable stpd s0 port 25
configure stpd s0 port cost 100 25
enable stpd s0 port 26
configure stpd s0 port cost 19 26
enable stpd s0 port 27
configure stpd s0 port cost 19 27
enable stpd s0 port 28
configure stpd s0 port cost 19 28
enable stpd s0 port 29
configure stpd s0 port cost 19 29
enable stpd s0 port 35
configure stpd s0 port cost 19 35
enable stpd s0 port 36
configure stpd s0 port cost 100 36
enable stpd s0 port 37
configure stpd s0 port cost 19 37
enable stpd s0 port 38
configure stpd s0 port cost 19 38
enable stpd s0 port 39
configure stpd s0 port cost 100 39
enable stpd s0 port 40
configure stpd s0 port cost 19 40
enable stpd s0 port 42
configure stpd s0 port cost 19 42
enable stpd s0 port 43
configure stpd s0 port cost 19 43
enable stpd s0 port 44
configure stpd s0 port cost 19 44
enable stpd s0 port 45
configure stpd s0 port cost 19 45
enable stpd s0 port 46
configure stpd s0 port cost 100 46
enable stpd s0 port 47
configure stpd s0 port cost 100 47
enable stpd s0 port 48
configure stpd s0 port cost 19 48
enable stpd s0 port 49
configure stpd s0 port cost 4 49
enable stpd s0 port 50
configure stpd s0 port cost 4 50

# GVRP configuration
disable gvrp
config gvrp both ports 1
config gvrp both ports 2
config gvrp both ports 3
config gvrp both ports 4
config gvrp both ports 5
config gvrp both ports 6
config gvrp both ports 7
config gvrp both ports 8
config gvrp both ports 9
config gvrp both ports 10
config gvrp both ports 11
config gvrp both ports 12
config gvrp both ports 13
config gvrp both ports 14
config gvrp both ports 15
config gvrp both ports 16
config gvrp both ports 17
config gvrp both ports 18
config gvrp both ports 19
config gvrp both ports 20
config gvrp both ports 21
config gvrp both ports 22
config gvrp both ports 23
config gvrp both ports 24
config gvrp both ports 25
config gvrp both ports 26
config gvrp both ports 27
config gvrp both ports 28
config gvrp both ports 29
config gvrp both ports 30
config gvrp both ports 31
config gvrp both ports 32
config gvrp both ports 33
config gvrp both ports 34
config gvrp both ports 35
config gvrp both ports 36
config gvrp both ports 37
config gvrp both ports 38
config gvrp both ports 39
config gvrp both ports 40
config gvrp both ports 41
config gvrp both ports 42
config gvrp both ports 43
config gvrp both ports 44
config gvrp both ports 45
config gvrp both ports 46
config gvrp both ports 47
config gvrp both ports 48
config gvrp both ports 49
config gvrp both ports 50
configure fdb agingtime 300

config iparp timeout 20

# -- IP Interface[0] = "Default"
enable bootp vlan Default
disable ipforwarding vlan Default
disable ipforwarding broadcast vlan Default
disable isq vlan Default
disable irdp vlan Default
enable icmp unreachable vlan Default
enable icmp redirects vlan Default
unconfigure vlan lally-dynamic ipaddress

# -- IP Interface[2] = "lally-admin"
disable ipforwarding vlan lally-admin
disable ipforwarding broadcast vlan lally-admin
disable isq vlan lally-admin
disable irdp vlan lally-admin
enable icmp unreachable vlan lally-admin
enable icmp redirects vlan lally-admin
unconfigure vlan lally-csmachines ipaddress

# Global IP settings.
configure irdp 450 600 1800 0
configure irdp broadcast
disable icmp useredirects
disable iproute sharing
disable multinet
disable bootprelay
#
# IP ARP Configuration
#
# IP Route Configuration
config iproute add default 128.213.50.1 1 
# Multicast configuration
config igmp 125 10 1
enable igmp snooping 
configure igmp snooping timer 260 260
disable ipmcforwarding lally-admin
disable igmp lally-admin
disable ipmcforwarding Default
disable igmp Default
# RIP interface configuration 
config rip delete vlan lally-admin
config rip txmode v2only vlan lally-admin
config rip rxmode any vlan lally-admin
config rip vlan lally-admin trusted-gateway None
config rip vlan lally-admin import-filter None
config rip vlan lally-admin export-filter None
config rip delete vlan Default
config rip txmode v2only vlan Default
config rip rxmode any vlan Default
config rip vlan Default trusted-gateway None
config rip vlan Default import-filter None
config rip vlan Default export-filter None
# RIP global parameter configuration 
disable rip aggregation
enable rip splithorizon
enable rip poisonreverse
enable rip triggerupdate
disable rip export static
disable rip export ospf-intra
disable rip export ospf-inter
disable rip export ospf-extern1
disable rip export ospf-extern2
config rip updatetime 30
config rip routetimeout 180
config rip garbagetime 120
# RIP Global enable/disable state
disable rip

#
# DVMRP Router Configuration
#
config DVMRP timer 60 140
disable DVMRP
config DVMRP add vlan Default
config DVMRP vlan Default timer 10 35
config DVMRP add vlan lally-admin
config DVMRP vlan lally-admin timer 10 35
disable pim-dm
# Ospf Area Cfg
create ospf area 0.0.0.0
config ospf area 0.0.0.0 interarea-filter None
config ospf area 0.0.0.0 external-filter None
# Ospf Range Cfg
# Interface cfg
config ospf vlan lally-admin area 0.0.0.0

config ospf vlan lally-admin cost 1
config ospf vlan lally-admin priority 1
config ospf vlan lally-admin timer 5 1 10 40
config ospf vlan lally-admin authentication none
config ospf vlan Default area 0.0.0.0

config ospf vlan Default cost 1
config ospf vlan Default priority 1
config ospf vlan Default timer 5 1 10 40
config ospf vlan Default authentication none
# Virtual Link cfg
# OSPF Router Cfg
disable ospf export static
disable ospf export rip

# ESRP Interface Configuration
config vlan lally-dynamic esrp priority 0
config vlan lally-dynamic esrp timer 2
config vlan lally-admin esrp priority 0
config vlan lally-admin esrp timer 2
config vlan lally-csmachines esrp priority 0
config vlan lally-csmachines esrp timer 2


# IPX routing configuration
enable ipxrip
enable ipxsap
configure ipxmaxhops 16

# IPX static routes

# IPX static services
upload configuration 128.213.48.161 la3sum 0:00

# SNTP client configuration
enable sntp-client
configure sntp-client primary server "128.213.2.2"
configure sntp-client secondary server "128.213.2.4"
configure sntp-client update-interval 64
configure timezone -300 autodst
disable radius
unconfigure radius server primary
unconfigure radius server secondary
configure radius primary shared-secret ""
configure radius secondary shared-secret ""

#
# End of configuration file for "la3sum".
#

-- StevenLindsey - 2011-07-15