QUICK START:

1) Make sure netgraph is working.
   (Run ngctl as root, if it loads you should be set.)

2) Install mpd (tested w/ version 3.9), it is in ports.
   (/usr/ports/net/mpd)

3) Copy all files in this directory to /usr/local/etc/mpd/.

4) For RPI Wireless, change the "default" clause of
   mpd.conf to use "rpi" rather than "ciscovpn".
   Skip to step 8.

5) Edit ciscovpn-iface-up.sh and enter the appropriate
   IPs for the VPN concentrator.

6) Edit mpd.conf and enter the appropriate IPs for the
   VPN concentrator.

8) Edit mpd.conf and set your username (authname), and
   mpd.secret to set username and password.

9) Run mpd as root, wait for it to say "IFACE: Up event".

10) Do whatever over VPN.

11) Type "quit" at the mpd prompt, to bring down the
    tunnel.

For more info see the PDF or email me.

-James
 jflemer@alum.rpi.edu